Neck Blank/Genuine Mahog Model 61 Dbl Cutaway

Description

Electric Set Neck Blank Model 61
Genuine Mahog
For Double Cutaway
(The double cut away model 61 mounts at the 22nd fret similar to the original sg
By Penta Guitarworks
Made in the USA
******
Please note: This product may take up to 10 working days until it ships out depending on our backlog
If you are building a guitar similar to an original sg style
1 11/16" at the nut and 2 1/4" at the other end,
2 3/4" long tenon milled at 3.5 degrees on the bottom.  Headstock size is a minimum of 7 1/4" long from nut x 3 5/8" wide.
This model will come with wings glued on each side of the headstock
Save time and money with these set neck blanks.
If you have done the math like I have, I know with 28 years
of experience, that it takes 2 1/2 to 3 hours to get a neck this far along.
I have developed a system to produce and sell these blanks
at a reasonable price.
Here's what you get for the money:
A rounded shank, a volute behind the nut,
an 17 degree pitched headstock,
a truss rod slot with the pocket hole, ready for the nut,
These blanks are made in Barberton, OH, USA,
.  Please note measurements
are within 1/32 of an inch.
For 24 3/4" scale.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application