Neck Blank/17 Degr.hdsk/4 Degr. neck joint at 16th fret/ For Carved top LP Style

Description

Electric Set Neck Blank Model 225
5 Piece Flamed Maple/ Mahog Laminated
17 Degree Headstock ( NO SKARF JOINT) Angle/4 Degree Neck Joint
The pictures are for representation only, the amount of flame may vary
Please note: This product may take up to 10 working days until it ships out depending on our backlog
Non Stepped on Botton of Tenon
For Carved Top Single Cutaway
By Penta Guitarworks
Made in the USA
******
Save time and money with these set neck blanks.
If you have done the math like I have, I know with 28 years
of experience, that it takes 2 1/2 to 3 hours to get a neck this far along.
I have developed a system to produce and sell these blanks
at a reasonable price.
Here's what you get for the money:
You get a 4 degree neck joint cut in,
a rounded shank, a volute behind the nut,
an 17 degree pitched headstock,
a truss rod slot( 1/4w x 7/16d / flat) with the pocket hole,  with the pocket hole,1 11/16 at the nut.
These blanks are made in Barberton, OH, USA,
by Americans.  The best part is that they are only
rough sanded leaving the final tweaking for you to do
so you can call it your own.
Other models and species of wood will be available
in the near future.  Please note measurements
are within 1/32 of an inch.
For 24 3/4" scale.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application