Mighty Mite Vintage Amber Neck for Tele, Indian Rosewood fingerboard

Description

Shaped, inlaid, fretted and finished—feels and plays great
Hard rock maple with a thin, vintage tint finish
Each neck has a single-action truss rod and traditional "skunk stripe" down the back
Peghead is drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushing
Features 25-1/2" scale length and 9-1/2" fretboard radius (see Product Description for more specs)
Shaped, inlaid, fretted and finished—looks and plays great!
Hard rock maple with a thin, vintage tint finish, and an inlaid "skunk stripe" down the back.
Other features include:
Thin polyurethane finish
Slotted and shaped PPS plastic string nut, with flat bottom
22 frets
Indian Rosewood fingerboard
Peghead-adjustable truss rod (for 4mm Allen wrench)
Traditional dot inlays
Without mounting holes, so you can drill to fit your body
Peghead drilled for 6-in-line tuning machines, with 10mm-diameter holes that fit sealed gear tuners with threaded peghead bushings.
Specifications:
Scale length: 25-1/2" (647.70mm)
Width at nut: 1-11/16" (42.86mm)
Width at 22nd fret: 2-3/16" (55.56mm)
Fretwire: .045" high x .095" wide (1.14mm x 2.41mm)
Fretboard radius: 9-1/2" (241.30mm)
Fret count: 22
String post spread: 4-11/16" (119.06mm)
Approximate heel length: 3-5/8" (92.07mm)
Fits neck pockets measuring 2-3/16" (55.56mm) wide x 3" (76.20mm) long x 5/8" (15.88mm) deep.
Neck thickness (approximate; not including fret):
.860" (21.84mm) at the 1st fret
.880" (22.35mm) at the 6th fret
.890" (22.61mm) at the 12th fret
Ideally, the neck should just drop into the neck-pocket, or be a little snug. Don't force the neck into the pocket. If the body is unfinished, remember that the finish will make the neck pocket smaller with lacquer build up on the edge of the rout. Be sure to compensate for the finish buildup or the neck will be too tight after finishing.