-40%
Guitar Neck WD Licensed Replacement Strat Neck SNMCR Maple Rosewood 080917SMR
$ 87.09
- Description
- Size Guide
Description
Guitar Neck, WD Fender® Licensed Strat® Replacement Neck25.5" Scale
56 mm heel width (2.20" or 2 7/32")
12" Radius
Maple neck with Rosewood fretboard
Please note: due to the natural wood used, there will be variations from the photos shown. If you need additional information, please contact us prior to ordering.
The trademarks, service marks or registered trademarks are those of their respective owners.
The parts on this site are for Bitterroot Guitars.
These parts do not originate from the original OEM manufactures unless specifically identified as such.
Fender®, Strat®, Stratocaster®, Esquire®, Telecaster®, Tele®, Jazzmaster®, Jaguar®, Mustang®, P-Bass®, and J-Bass® are registered trademarks of Fender Musical Instruments Corporation.
Specifications:
Maple neck with Rosewood Fret board
22 Fret (Overhang)
12" Radius
25.5" Scale
Heel Width is approximately 56mm (2 7/32"), some variations will occur due to hand production.
Thin Satin Finish Polyester
Slotted for 1 11/16" Nut. Slot is .12" wide.
Please note
, nut is not included.
Fret wires are .104" wide, Wide/medium form. Frets are polished
White Position Markers
Neck is C Radius .86" at fret 1, .90" at frret 12
Overall heel height is 1.03"
Bottom of Fret board to bottom of heel is .79" approximately
Overhang is approximately .375" (3/8")
Two Way Truss Rod
Truss rod is adjusted from Headstock
WD Licensed by Fender® Licensed Strat® neck
Tuner Mounting holes are bored at 10mm (25/64") for Modern Sealed tuners.