Guitar Neck Blank 24.75 scale Maple Acoustic B stock

Description

Acoustic neck blank
Model 24.75 Maple B stock (minimal figure)
These necks will have some cosmetic defect
such as  mineral streaks, discoloration, or small knots
24.75 scale
By Penta Guitarworks
Made in the USA
******
Please note: This product may take up to 10 working days until it ships out depending on our backlog
You get a 1.5 degree shoulder cut in,
leaving the tenon oversized at 1 7/8" wide by 3 3/4" high
and 1" long so that you can make your own dovetail or bolt-on
the size that you need.  You also get
a rounded shank, a volute behind the nut,
an 11 degree pitched headstock,
one piece.
a 1/4"w x 7/16" truss rod slot flat on the bottom.
If you are adjusting the truss rod from the head stock and need it with the pocket hole  cut into the head stock,
let us know when you order and we will cut it in at no extra charge.
Other wise, it will be assumed that you are adjusting it from the sound hole
and will be shipped without the pocket hole cut in.
These are set up for the truss rod to be adjusted from the sound hole.
These blanks are made in Barberton, OH, USA,
by Americans.  The best part is that they are only
rough sanded leaving the final tweaking for you to do
so you can call it your own.
Other models and species of wood will be available
in the near future.  Please note measurements
are within 1/32 of an inch.
1 3/4" at the nut and 2 3/16" at the body.
NOTE:  The bottom 1 7/8" of the heel is glued on.
.
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application